资讯动态

contact us

Zibo dajin papermaking equipment co. LTD

Contact person: li chunming

Machine: 0533-6556177

Phone: 13901646479

Email address: dajin_lcm@126.com

Fax: 0533-6555161

Address: no. 98 xingxing road, zhoucun district, zibo city, shandong province

Website: www.dajinzzsb.com


current position: Home >> News >> Technical knowledge

Safety procedures for starting rewinder

2018-12-24

Before starting up the rewinder, the rewinder must send out the signal of starting up. It is sure that no one is in danger. The safety facilities in the pressing area where the baffle falls can be started up under the normal working state


In the operation of rewinder, the paper bales and rollers are not allowed to be touched, and are not allowed to enter the safety fence between the longitudinal cutting area and the paper returning area.


It is not allowed to tighten or grind the knife in the operation of rewinder. It is forbidden to touch the round knife or cross the knife edge in the operation.


4. Unloading and bundling of rewinding machine shall be carried out slowly, and the direction under the lifting platform of paper bundling is not allowed to stand or pass.


There is a certain load on the stretching arm of the rewinder's paper rewinding frame, and it is not allowed to push the stretching arm end when there is more than one set of paper rolls.

复卷机生产厂家,复卷机厂家,复卷机价格.png

6 the applicable crane shall comply with the safety regulations. The hook for hoisting paper and binding shall be hung firmly. The hoisting paper and binding shall be carried out slowly when placed on the paper return frame to avoid impact and mechanical injury.


If the paper shaft of rewinder is bent or damaged, mark it immediately and report to the workshop for repair.


8. When the rewinding machine encounters paper breaking in the rewinding process, it shall brake rapidly. If it is found that the paper bundle, bottom knife roller and bottom roller are still rotating after braking, and the paper roller is not lifted, it is not allowed to operate with paper.


When hoisting the paper shaft on the paper shaft rack with a crane, check whether the hook is fastened and send out the hoisting signal before hoisting the paper shaft.


10 operators should often pay attention to the core clamping, up and down, the paper roller lifting position, so as to avoid injuries.


During operation, it is strictly prohibited to climb onto the rack or safety cover, lean or bend down to enter the fence or other dangerous areas, and do not interrupt or use safety facilities at will.


The operator should concentrate on the paper, to prevent hand, clothes involved in cutting, boot should have a high sense of responsibility, focus on, serious operation, do not leave the operation room at will, the machine in operation, there must be someone in the operation room, in case of accident.


label

1111.jpg

扫一扫,进入手机站