A) paper width clamping device the paper width clamping device operated pneumatically on the piecewise correcting roller
B) paper guide device:
The paper frame is guided through the rewinder through a guide plate, an air nozzle and a belt, and the paper guide device is located in the center of the rewinder. lead
Paper is in the rewinder running at the speed of paper feed. A wedge-shaped paper lug is torn on the master roll and introduced into the pressure zone between the segmented correcting roll and the paper guide belt on the correcting roll, the guide plate, the air nozzle and the belt to transport the paper lug and introduce it into the two bottom rollers.
C) coil carrier
Weight 60000 kg
About 2400 mm width
Rail width 1550mm
Length paper shaft bearing spacing +4200mm
The velocity is 20 meters per 5 meters per minute
The loading and unloading of the trolley is carried out by the crane, and only one master roll or paper shaft can be moved at a time. The starting position of the trolley is in the paper machine production line, namely #1 rewinder. The car has two fixed stops, #1 rewinder and #2 rewinder. The car moves from one station to another and starts to move at a higher speed (20 m/min). After arriving at the deceleration zone, the speed decreases (5 m/min) and stops when it reaches the limit position. The car is equipped with safety bars at both ends, which will immediately cut off the motor power and put on the brake. In addition, a light flashed as the car moved.